Clip "Universal" spring zink 30 mm

Clip Universal

The main application of the universal clip is to fasten the greenhouse film, without damaging it, to the greenhouse frame. The zig-zag clip is lightweight, durable and easy to use. Suitable for fixing one or more layers of films. It makes it possible to work even at subzero temperatures. The universal clip can be made of aluminum or galvanized steel.

The galvanized clip is recommended for use only on straight sections. When bent, it deforms and the side shelves narrow. In comparison with the aluminum clip, galvanized is not so plastic and durable. Due to the width of 30 mm, it can be installed on various materials for the manufacture of the greenhouse frame.

Spring clip "universal" 30 mm allows for fastening only up to two layers of film or other materials for covering - tarpaulin, awning with a total thickness of 400 microns. In addition, the 30 mm galvanized zig-zag clip has a number of advantages over the 25 mm clip. The main advantage due to its width, it is used for attaching hooks, which in turn serve to use screens, nets, as well as ropes and others).

Galvanized spring clip "universal" 30 consists of a galvanized clip 30 mm wide and a galvanized spring wire with a plastic coating of 2.0 mm.

Nowadays, fastening the film to the greenhouse using a spring clip has become the standard. The clip provides: quick installation and dismantling of the film, its reliable fastening in windy weather, it is reusable. The element that carries the most load, the plastic-coated spring, is cheap and easy to replace with a new one.

Video review of clips "Universal"

Clip mounting:

The greenhouse film is placed on an zink clip, then a spring with a plastic coating of 2.0mm is inserted into it with a smooth movement. After that, it is necessary to loosen the film tension and make sure that the spring fits completely into the profile. No piece of spring should protrude beyond the clip. When cutting the film (after installing it), you must leave 5-10 cm of margin outside the clip.

Removing the mount:

Using pliers or a screwdriver, it is necessary to free one of the ends of the spring and gently pull it out of the profile. The operation takes a few seconds.

Contact us

Contact us in any way convenient for you, and we will answer as soon as possible

Romania +40 748 927 011
Ukraine +38 (097) 938-91-11
For foreign countries +38 (050) 380-35-70 Skype: alexander.prokopenko.kiev