Drive reducer 3GG G400/G800, 0.55/0.75 kW, 400/800N·m

Drive reducer 3GG

Compact drive gearbox with shaft exit on two sides for ventilation and shading systems.

The gearbox is easy to install and operate, it is equipped with an automatic backstop and limit switches.

The gearbox is equipped with the ability to manually close / open in case of power failure. To do this, it is enough to remove the end cover of the reducer motor and rotate the motor with a wrench.

A position sensor for connection to automatic ventilation and shading control systems is supplied with the geared motor.

3GG G400 Model Specifications

  • Rotation speed: 2.6 rpm
  • Rated current: 1.9 A
  • Rated power: 0.55 kW
  • Torque: 400 N·m
  • Voltage: 380 V (3 phases)
  • Frequency: 50 Hz
  • Working temperature: -10 ° C to 50 ° C
  • Degree of protection: IP55
  • Working range: 0.1 - 90 revolutions

3GG G800 Model Specifications

  • Rotation speed: 2.6 rpm
  • Rated current: 2.01 A
  • Rated power: 0.75 kW
  • Torque: 800 N·m
  • Voltage: 380 V (3 phases)
  • Frequency: 50 Hz
  • Working temperature: -10 ° C to 50 ° C
  • Degree of protection: IP55
  • Working range: 0.1 - 90 revolutions

Product Features

This product has an excellent self-locking device and reverse restriction, which can realize automatic control, especially suitable for window opening cases with high self-locking requirements;

This product has a manual cancellation feature. In case of power failure or product malfunction, remove the motor end of the reducer and manually turn the release lever with a key to rotate the auger normally;

This product is available with potentiometer position sensor kits. You can choose to buy. The kit includes a bracket, a key, locking rings and other spare parts. These include different gears for adjusting the drive shaft to different gear ratios.

There are two ways to install the product, namely top and side mounting.

Bottom mount:

  • The mounting position is at the bottom of the product, and there are 4 fixed threaded holes. Secure the 4 screws with the appropriate fasteners.

Side mounting:

  • Both sides of the output shaft are installed, with 4 threaded holes on each side. It can be fixed with 4 matching screws of the model.
Contact us

Contact us in any way convenient for you, and we will answer as soon as possible

Romania +40 748 927 011 seredobrota@seredobrota.com
Ukraine +38 (097) 938-91-11 office@teplicapro.com
For foreign countries +38 (050) 380-35-70 Skype: alexander.prokopenko.kiev